In Brief 23
While the charge cord is plugged
into the vehicle, the vehicle cannot
be driven.
Charging
Start Charge
1. Make sure the vehicle is
parked and turned off.
2. Push the rearward edge of the
charge port door in and release
to open the door.
In cold weather conditions, ice
may form around the charge
port door. Remove ice from the
area before attempting to open
or close the charge port door.
3. Open the trunk, lift the left load
support floor cover, and
remove the charge cord. Pull
up on the charge cord handle
to release. The vehicle plug is
stored as shown.
4. Plug the charge cord into the
electrical outlet. See Electrical
Requirements for Battery
Charging 0 228. Verify the
charge cord status. See the
charge cord user guide. See
Charge Cord 0 226. Select the
appropriate charge level using
the Select Charge Level
Preference screen on the
center stack. See “Charge
Limit Selection” under
Programmable Charging 0 121.
5. Plug in the vehicle plug of the
charge cord into the charge
port on the vehicle. Verify that
the charging status indicators
illuminate on top of the
instrument panel and outside
mirror and a horn chirp occurs.
See Charging Status Feedback
0 222.
To Next Page
Loading...
