240 Vehicle Care
To close the hood:
1. Before closing the hood, check
that all filler caps are properly
installed. Then, lift the hood to
relieve pressure on the
hood prop.
2. Remove the hood prop from
the slotted retainer in the hood
and return it to its retainer
above the radiator support. The
prop rod must lock into place
when returning it to the retainer
to prevent hood damage.
3. Lower the hood 20 cm (8 in)
above the vehicle and release
it so it fully latches. Check to
make sure the hood is firmly
closed. Repeat the process if
necessary.
To Next Page
Loading...
