EasyManua.ls Logo

Cadillac CT4 2022 - Front Seat Features; Power Seat Adjustments; Front Seat Lumbar Massage; Automatic Heated;Ventilated Seats

Cadillac CT4 2022
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
FRONT SEAT FEATURES
POWER SEAT ADJUSTMENTS
Note: Seat controls and appearance may vary depending on vehicle content.
A. Thigh Support
Pull up and slide the lever
to adjust the thigh support.
B. Seat Position
Move the horizontal
control to slide the seat
forward or rearward, and to
tilt
, raise or lower the seat.
C. Seatback Recline
Move the vertical control to recline or raise the seatback.
D. Lumbar Support
Press the round control or turn the feature select knob
(not
shown) to adjust the amount and position of lumbar support.
FRONT SEAT LUMBAR MASSAGE
With the ignition On, turn the feature select knob on the side of the
seat (not shown) to view and select the massage seings displayed
on the infotainment screen. Press the massage recall buon (E) on
the side of the seat to activate the most recent massage seing.
AUTOMATIC HEATED/VENTILATED FRONT SEATS
When the vehicle is turned on, the heated or ventilated front
seats may automatically activate based on the vehicle’s interior
temperature.
To turn the automatic heated or ventilated front seats on or o,
go to Seings > Vehicle > Climate and Air Quality.
SET SEAT MEMORY
POSITIONS
With the ignition On or in
Accessory mode:
1. Adjust the driver’s
seat and power out-
side mirrors to the
desired positions.
2. Press and release the
SET buon on the
driver’s door. A beep
will sound.
3. Immediately press and hold buon 1 or 2 until two beeps
sound. Use the buon that matches the Driver Information
Center welcome message indicating driver 1 or 2.
To store a seat position for more clearance when exiting the
vehicle, repeat the steps using the Exit buon.
RECALL SEAT MEMORY
POSITIONS
Press and hold buon 1, 2 or Exit until the set position is
reached.
To set the memory/exit positions to be recalled automatically
when the ignition is turned on/o (for exit recall, the driver’s
door must be opened), go to Seings > Vehicle > Seating
Position > Seat Entry Memory and Seat Exit Memory.
See Seats and Restraints in your Owner’s Manual.
Optional equipment
B
A
C D
E

Related product manuals