Cadillac CT5 2022 - Front Seat Features and Memory; Power Seat Adjustments; Lumbar Massage and Auto Heated;Ventilated Seats; Seat Memory Position Storage

15
FRONT SEAT FEATURES
POWER SEAT ADJUSTMENTS
Note: Seat controls and appearance may vary depending on vehicle content .
A. Thigh Support
♦
Pull up and slide the lever to
adjust the thigh support.
B. Seat Position
Move the horizontal control
to slide the seat forward or
rearward, and to tilt
♦
, raise
or lower the seat.
C. Seatback Recline
Move the vertical control to recline or raise the seatback.
D. Lumbar Support
Press the round control or turn the feature select knob
♦
(not
shown) to adjust the amount and position of lumbar support.
FRONT SEAT LUMBAR MASSAGE
♦
With the ignition On, turn the feature select knob on the side of the
seat (not shown) to view and select the massage seings displayed
on the infotainment screen. Press the massage recall buon (E) on
the side of the seat to activate the most recent massage seing.
AUTOMATIC HEATED/VENTILATED FRONT SEATS
♦
When the vehicle is turned on, the heated or ventilated front
seats may automatically activate based on the vehicle’s interior
temperature.
To turn the automatic heated and ventilated front seats on or
o, go to Seings > Vehicle > Climate and Air Quality > Auto
Heated Seats and Auto Cooled Seats.
SET SEAT MEMORY
♦
POSITIONS
With the ignition On or in Accessory mode:
1. Adjust the driver’s
seat, power steering
column
♦
and power
outside mirrors to the
desired positions.
2. Press and release the
SET buon on the
driver’s door. A beep
will sound.
3. Immediately press and hold buon 1 or 2 until two beeps
sound. Use the buon that matches the Driver Information
Center welcome message indicating driver 1 or 2.
To store seat and power steering column
♦
positions for more
clearance when exiting the vehicle, repeat the steps using the
Exit buon.
RECALL SEAT MEMORY
♦
POSITIONS
Press and hold buon 1, 2 or Exit until the set position is
reached.
To set the memory/exit positions to be recalled automatically
when the ignition is turned on/o (for exit recall, the driver’s
door must be opened), go to Seings > Vehicle > Seating
Position > Seat Entry Memory and Seat Exit Memory.
See Seats and Restraints in your Owner’s Manual.
♦ Optional equipment
B
A
C D
E