Trip Points
Trips can be as simple as one destination, or in addition
to the destination, can have up to 10 waypoints.
Select this option to list, edit, and save the waypoints
and destination entered for your current trip. Once
you have entered all the points for the trip, press the
Store reconfigurable soft key to save the trip to memory.
The system will allow you to save up to 10 trips.
The following choices are available in the
Trip Points menu:
Route Option: This key is the same as Route Option
from the main Navigation Menu. See “Route Option”
listed earlier for more information.
Store: Press this key to save a trip to memory.
Stored Trips: Press this key to retrieve a list of all
stored trips.
The following prompts are available to you while in the
Stored Trips menu:
More: Press this key to scroll through the full name
of the stored trip when all of the information does not fit
on the display. Each time this key is pressed, the
scrolling speed is increased.
Info (Information): Press this key to list the destination
and any waypoint(s) for a stored trip.
Map: Press this key to view the map associated with
the stored trip.
Edit Name: Press this key to change some or all of the
information of the saved trip name.
2-22
To Next Page
Loading...
