Memo Append X: This command instructs the
system to add to a previously recorded memo that
is not the memo currently highlighted on the
screen. To use this command, you must know the
location of the previously recorded memo to
which you want to add information. For example, if
you want to add to the memo stored in location
two, say “memo append two.”
Memo Delete: This command instructs the
system to delete the memo currently highlighted
on the screen.
Memo Delete X: This command instructs the
system to delete a previously recorded memo
saved to a specific location. To use this command,
you must know the location of the memo that
you want to delete. For example, if you want to
delete the memo saved in location one, say “memo
delete one.”
Yes: This command confirms choices made while
using the Voice Memo screen.
No: This command cancels choices made while
using the Voice Memo screen.
Navigation Commands
North Up: This command instructs the system to
switch from the current map view to North Up.
Heading Up: This command instructs the system
to switch from the current map view to Heading Up.
Bird View: This command instructs the system to
switch from the current map view to the bird view.
Split View: This command instructs the system to
switch from the current map view to a regular view
of the map with a pop-up view of upcoming turns.
Single Screen: This command instructs the
system to switch back from the split view screen
to the regular map view.
Map View: This command instructs the system to
switch from the current map view to the map
screen with the route highlighted.
Zoom In: This command instructs the system to
provide a closer scale view of the current map.
Zoom Out: This command instructs the system to
provide a larger scale view of the current map.
100
To Next Page
Loading...
