Mirror to Curb in Reverse
If your vehicle has the optional memory package,
you will have this feature. When this feature is
turned on, the passenger’s outside rearview mirror
will move downward so you can view the curb when
the shift lever is shifted into REVERSE (R). The
mirror will return to the last known driving position
when the shift lever is moved out of REVERSE (R).
The following modes are available for selection:
Mode 1: ON
Mode 2: OFF
Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to
which the vehicle was programmed may have
been changed since it left the factory. To program
the vehicle to a different mode, do the following:
1. Enter the Personalization menu following
the instructions listed previously.
2. Scroll to Mirror to Curb in Reverse using the
TUNE/SEL knob.
3. Press the TUNE/SEL knob to switch back and
forth between on and off.
When the mode is turned on, an X will appear
in the box.
The mode you selected is now set. You can either
exit the programming mode by following the
instructions later in this section or program the
next feature available on your vehicle.
Enhanced Chime Volume
This feature allows you to adjust the volume level
of the vehicle’s warning chimes. The chime
volume cannot be turned off, only adjusted. The
following modes are available for selection:
Mode 1: NORMAL
Mode 2: LOUD
Before your vehicle was shipped from the factory,
it was programmed to Mode 1. The mode to
which the vehicle was programmed may have
been changed since it left the factory. To program
the vehicle to a different mode, do the following:
1. Enter the Personalization menu following
the instructions listed previously.
2. Scroll to Enhanced Chime Volume using the
TUNE/SEL knob.
116
To Next Page
Loading...
