Traveling on a Planned Route
After a route has been calculated and the route
highlighted, you may hear an audio prompt
to proceed to the highlighted route. When you are
ready, drive the vehicle to the highlighted route.
Once you begin driving on the route, the
system will give additional audio and visual
prompts as you approach your next maneuver.
Each maneuver is indicated on the map with a red
maneuver pin.
Maneuver pins are red stick pin icons on the map
that indicate changes in the road or special
action that must be taken by the driver to remain
on the currently traveled road. For example,
the road may have a sharp curve in it. The curve
would not qualify as an official turn on the
planned route. However, the driver must be aware
of the curve so that he or she can stay on the
planned route. Maneuver pins are always
displayed along a planned route, but voice prompts
and screen pop-ups will only be given if these
features are turned on. See “Voice Volume” under
Setup Menu on page 27 and “Reconfigurable
Keys” under Using the Navigation System
on page 22 for more information.
As you are traveling, the current road is shown at
the bottom center of the map screen and the
next maneuver will be in the upper center of the
map screen. Anytime while on the route, you
can press the navigation repeat key to get
an audio prompt of your next maneuver.
Maneuver Pins
55
To Next Page
Loading...
