Scan Up, Scan Down: These commands instruct
the system to preview stations either forward or
backward. To stop this feature, say “Scan” again.
Preset X: This command instructs the system
to change the current radio station to one of
the preset stations on the active audio source.
To use this command, you must know the number
of the preset you wish to hear. For example, if
you want to hear the station saved to preset three,
say “preset three.”
CD Commands
CD Player: This command instructs the system to
display the CD player screen. If a music CD is
loaded, it will begin playing.
CD Changer: This command instructs the system
to display the CD changer screen.
Pause: This command instructs the system to
stop play on a CD.
Play: This command instructs the system to
resume play of a CD.
Play Track X: This command instructs the system
to play a specific track. To use this command, you
must know the number of the track you wish to
hear. For example, if you want to hear the second
track on the current CD, say “play track two.”
Next Track: This command instructs the system
to advance the current CD to the next track.
Previous Track: This command instructs the
system to go to the previous track or re-start the
current track.
Next Disc: This command instructs the system to
advance the CD changer to the next CD loaded.
Previous Disc: This command instructs the
system to go back to the previous disc.
Disc X: This command instructs the CD changer
to play a specific CD. To use this command,
you must know the number of the CD you wish to
hear. For example, if you want to hear the CD
loaded in slot two, say “disc two.”
Random Track On: This command instructs the
CD changer to play the tracks on the current
CD in random, rather than sequential, order.
Random Track and Disc On: This command
instructs the CD changer to play the tracks on the
current CD in random, rather than sequential,
order. Once the current CD is finished, the next
CD to play will be chosen randomly.
98
To Next Page
Loading...
