After acknowledging the start up information you will be
able to access the NAV (navigation) and DEST
(destination) functions. Once accessed, enter or delete
information in the navigation system or access other
functions. See instructions later in this section.
Each time the vehicle is started and the navigation
system is turned on, the Caution screen appears. If the
Caution screen appears, touch OK to accept the
Caution. If OK is not selected, all hard keys except for
NAV (navigation) and DEST (destination) can be
accessed. Once the NAV or DEST hard keys are
pressed, this Caution screen appears and OK must be
pressed to access the navigation map.
When getting started the navigation system can be set
to preferences or information that has been entered
can be deleted using various options.
Language — English/Metric
To change the language of the navigation screens, see
“DIC Vehicle Customization” in the Index of the
vehicle’s owner manual.
To change the navigation screens from English or
metric, see “DIC Operation and Displays” in the Index of
the vehicle’s owner manual.
Deleting Personal Information
This navigation system can record and store
destinations and personal information such as names
and addresses. When disposing of the vehicle, you
may want to delete this information. See “Previous
Destinations — Deleting” and “Address Book — Editing
and Deleting Entries” under Destination on page 2-12
for deleting this information.
1-6
To Next Page
Loading...
