Storing Radio Station Presets
Up to 36 preset stations can be stored. AM, FM, and
XM (if equipped) can be mixed. To store presets:
1. Press the
O (power) knob to turn the system on.
2. If viewing a map screen, touch the source
screen button, press the AUDIO key, or press the
FAV (favorite) key.
3. Select the band.
4. Seek or tune to the desired station, to select the
station.
5. Press and hold one of the preset screen buttons for
more than one and a half seconds.
6. Repeat the steps for each preset.
To change the number of preset pages, see “Number of
Preset Pages” under “Radio Menu” under Navigation
Audio System on page 3-2 for more information.
Entering an Address and Point
of Interest, and Storing Preset
Destinations
The vehicle must be in P (Park) to perform these
operations.
Entering an Address
If having trouble finding a city or a street name:
• Enter the street name first instead of the city name,
or vice versa.
• Enter more characters or reduce the amount of
characters to reduce or expand the available
options.
To set a destination by entering a street name:
1. Press the
O to turn the system on.
2. A caution may appear. Touch the OK screen button
to proceed.
3. Press the DEST hard key.
4. Select the Street screen button.
5. The Street name category is automatically selected
for entry. Start entering the street name.
It is recommended that directional information or
street type is not entered, and use the Space screen
button between street or city names. For example,
the street name N. Royal Oak Rd. should be
entered as royal(Space screen button)oak. Use the
backspace (
q ) screen button if an incorrect
character has been entered.
1-7
To Next Page
Loading...
