Brightness/Contrast/Mode
Touch this screen button to change the brightness,
contrast, and mode of the display.
] (Brightness): Touch the + (plus) or − (minus) screen
buttons to increase or decrease the brightness of the
screen.
_ (Contrast): Touch the + (plus) or − (minus) screen
buttons to increase or decrease the contrast of the
screen.
Auto (Automatic): Touch to automatically adjust the
screen background depending on exterior lighting
conditions.
Day: Touch to make the map background brighter.
Night: Touch to make the map background darker.
The dimming change button on the navigation faceplate
is used to toggle between these dimming modes.
Setting the Clock
The navigation system time and the analog clock are
separate features. Changing the time through the
navigation system will not change the time on the analog
clock and vice versa. See “Analog Clock” in the Index
of your vehicles owner manual to change the analog
clock time.
To set the time:
1. Press the CONFIG key to enter the menu options,
then press the CONFIG key repeatedly until the
time is selected or touch the clock screen button
located in the upper right corner of the screen.
2. Press the Hours and Minutes – (minus) and
+ (plus) signs to decrease and to increase the time.
12/24 HR Format: Select the 12 HR screen button for
standard time; select the 24 HR screen button for
military time.
DD/MM or MM/DD Format: Press the + (plus) or
− (minus) display buttons to increase or decrease the
MM, DD, and YYYY date display.
Auto GPS Update: Press either the On or Off display
buttons. If On, the GPS update feature automatically
updates the date and time.
Daylight Savings: Press either the On or Off display
buttons. Press On to jump ahead for daylight savings
time. Press Off to fall back out of daylight savings time.
Time Zone: Auto GPS Update must be off before
the time zone can be changed. Select the change
display button to select the desired time zone.
2-36
To Next Page
Loading...
