Cadillac CTS 2009 - Digital Signal Processing (DSP)

Adjusting the Speakers
L/R (Left/Right) (Balance): To adjust the balance
between the left and the right speakers, touch and hold
the L or R screen buttons.
Front/Rear (Fade): To adjust the fade between the
front and the rear speakers, touch and hold the Front or
Rear screen buttons.
Digital Signal Processing (DSP)
If the system has Digital Signal Processing (DSP),
DSP is used to provide a choice of five different listening
experiences. DSP can be used while listening to the
audio system. The type of DSP selected is displayed on
the status screen.
Select from the following DSP settings:
Normal: Select to adjust the audio to be in normal
mode. This provides the best sound quality or all seating
positions.
Driver: Select to adjust the audio to give the driver the
best possible sound quality.
Rear: Select to adjust the audio to give the rear seat
occupants the best possible sound quality.
Centerpoint
®
: Select to turn on Bose Centerpoint.
Centerpoint produces a full vehicle surround sound
listening experience from a CD, MP3/WMA, DVD, AUX
(auxiliary) input, or XM stereo digital audio source
and delivers five independent audio channels from the
conventional two channel stereo recordings. This is
not available for AM or FM.
5.1 Surround: 5.1 Surround sound processing is
available for DVD-A/DVD-V sources that were recorded
in 5.1 surround.
• 5.1 Surround + Normal: Best for all seating
positions.
• 5.1 Surround + Rear: Best for the rear seating
position.
3-6