9-72 Vehicle Care
14. Replace the air only hose (G)
and the power plug (H) and
cord back in its original
location.
15. Place the equipment in the
original storage location in the
vehicle.
The tire sealant and compressor kit
has an accessory adapter located in
a compartment on the bottom of its
housing that may be used to inflate
air mattresses, balls, etc.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant/air hose to
access the canister release
button.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
6. Rewrap the sealant/air hose.
Storing the Tire Sealant
and Compressor Kit
(Coupe)
The tire sealant and compressor kit
is located in the trunk.
1. Open the trunk. See Trunk on
page 1‑20.
2. Remove the retainer that holds
the tire sealant and compressor
kit in place.
3. Remove the tire sealant and
compressor kit from the foam
container.
To Next Page
Loading...
