Keys, Doors, and Windows 2-7
Keyless Boot Opening
Press the boot release button on the
boot lid above the number plate to
open the boot if the keyless access
transmitter is within range. See Boot
(Sedan, Coupe) on page 2‑17 for
additional information.
There are other conditions which
can affect the performance of the
transmitter. See Remote Keyless
Entry (RKE) System on page 2‑4.
With Remote Start Shown, Without
Similar
Q (Lock): Press once to lock the
doors. The direction indicators flash.
When
Q is pressed twice, the
direction indicators flash twice and
the horn sounds once to confirm
locking.
To program the vehicle so the turn
signal indicators do not flash and
the horn does not sound when
pressing
Q on the keyless access
transmitter, see “Remote Door Lock
Feedback” under Vehicle
Personalisation on page 5‑47.
K (Unlock): Press once to unlock
only the driver door. The direction
indicators flash twice.
Press
K twice within five seconds
to unlock all the doors. The interior
lamps may come on.
To program the vehicle so the turn
signal indicators do not flash and
the fog lamps and reverse lamps
remain on steady for about
20 seconds when the keyless
access transmitter is used to unlock
the vehicle, see “Remote Door
Unlock Feedback” under Vehicle
Personalisation on page 5‑47.
For vehicles with the memory
feature, press
K on the keyless
access transmitter to program and
recall the memory settings. See
Memory Seats on page 3‑7 for more
information.
/ (Remote Start): Press to
operate the remote start feature.
See Remote Vehicle Start on
page 2‑10 for additional information.
To Next Page
Loading...
