Storage 4-7
occasionally stop the vehicle to
make sure the cargo remains in its
place.
Do not exceed the maximum vehicle
capacity when loading the vehicle.
For more information on vehicle
capacity and loading, see Vehicle
Load Limits on page 9-11.
Installing the Crossrails
1. Crossrails
2. Siderail Cover
Before installing the crossrails (1),
remove the siderail covers (2). Pull
straight up on the rear of the siderail
cover. Store covers flat; do not stack
items on them.
1. Identify the front and rear
crossrail.
2. The front crossrail (1) is smaller
than the rear crossrail (2).
3. The crossrail supports are
labeled with an arrow (2) that
needs to point toward the front
of the vehicle. A pin (1) will be
visible on the bottom when the
crossrail support lever is down.
To install the crossrail support,
move the lever into the forward
upper position; the pin (1) will
not be visible.
To Next Page
Loading...
