Cadillac CTS 2018 - Memory Features

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-Europe-11374014) -
2018 - crc - 9/14/17
IN BRIEF 13
Back Bolster Support
To adjust back bolster support,
if equipped:
.
Press and release or hold Feature
Select (1) to scroll to back bolster
support on the centre console.
.
Press Forward (5) or Rearward (3)
to adjust back bolster support
inward or outward.
Memory Features
If equipped, memor y seats allow two
drivers to store and recall their unique
seat positions for driving the vehicle,
and a shared exit position for getting
out of the vehicle. Other feature
positions may also be set, such as
power mirrors and power steering
wheel, if equipped. Memor y positions
are linked to RKE transmitter 1 or 2
for automatic memory recalls.
Before storing, adjust all available
memory feature positions. Turn the
ignition on and then press and release
SET; a beep will sound. Then
immediately press and hold 1, 2,
or
B (Exit) on the driver door until
two beeps sound. To manually recall
these positions, press and hold 1, 2,
or
B until the saved position is
reached.
When Auto Memor y Recall is enabled
in vehicle personalisation, positions
previously stored to memor y buttons
1 and 2 are recalled when the ignition
is changed from off to on or ACC/
ACCESSORY.
When Easy Exit Options is enabled in
vehicle personalisation, the feature
automatically recalls the previously
stored exit position when exiting the
vehicle. See Memory Seats 0 60.