Cadillac CTS 2018 - Number Plate Lamp

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-Europe-11374014) -
2018 - crc - 9/14/17
270 VEHICLE CARE
To replace one of these bulbs:
1. Reach under the rear fascia and
locate the reversing lamp
assembly.
2. Remove the bulb socket (1) by
turning anticlockwise and pulling
straight out of the lamp
assembly (2).
3. Pull the bulb out of the socket.
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket by turning
clockwise.
Number Plate Lamp
Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the lamp assembly (3)
toward the centre of the vehicle.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
anticlockwise to remove it from
the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.