Cadillac CTS 2018 - Jump Starting

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-Europe-11374014) -
2018 - crc - 9/14/17
VEHICLE CARE 303
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant/air hose to
access the canister release
button.
2. Press the canister release
button (9).
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into place.
6. Rewrap the sealant/air hose.
Storing the Tyre Sealant
and Compressor Kit
To access the tyre sealant and
compressor kit:
1. Open the boot. See Boot 0 39.
2. Lift the cover.
3. Remove the strap.
4. Remove the tyre sealant and
compressor kit.
To store the tyre sealant and
compressor kit, reverse the steps.
Jump Starting
For more information about the
vehicle batter y, see Battery 0 263.
If the battery has run down, try to use
another vehicle and some jumper
cables to start your vehicle. Be sure to
use the following steps to do it safely.
{
Warning
Batteries can hurt you. They can be
dangerous because:
.
They contain acid that can
burn you.
.
They contain gas that can
explode or ignite.
.
They contain enough
electricity to burn you.
If you do not follow these steps
exactly, some or all of these things
can hurt you.