Removal and Installation of the Sealant
Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister
release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from
your dealer/retailer.
5. Push the new canister into place.
Tire Sealant and Compressor Kit
Storage
The tire sealant and compressor kit is located under the
storage tray on the driver side trim panel (over the
rear wheelhouse).
To access the tire sealant and compressor kit:
1. Remove the tray by pulling up on the finger
depression to access the tire sealant and
compressor kit.
5-49
To Next Page
Loading...
