Cadillac LYRIQ 2024 - Charge Later

Cadillac LYRIQ Owner Manual (GMNA-Localizing-Europe-16878479) -
2024 - CRC - 9/20/23
102 Instruments and Controls
With Charge Later selected, the screen
displays:
.
Text indicating that your vehicle will
delay charging to be ready by the time
specified.
.
The ability to set the desired time at
which the vehicle will finish charging and
be ready for departure.
.
Target Charge Level Gauge: Ability to set
the percentage at which the vehicle will
stop charging. The gauge also displays an
estimate of the vehicle's range upon
completing the charging session.
.
Preconditioning: Ability to heat or cool
the cabin to your desired temperature
using energy from the charger. Energy
from the battery is not used to condition
the cabin, ensuring the vehicle gets the
maximum range from the charging
session. Preconditioning happens at the
end of the charge, and right before the
departure time.
To set the time at which the vehicle will
complete the charge and be ready for
departure:
Drag each value up or down within the time
selector until the preferred time is selected.
The time selector can also be modified using
the MFC on the centre console by turning
the knob when the preferred value is
highlighted. If the desired charge level
cannot be reached by the selected time, a
message will display that one of the two
preferences must be adjusted.
To adjust the desired charge level in Charge
Later mode, see “Charge Now” earlier in this
section.
Setting the Preconditioning preference:
Touch the switch to turn on Preconditioning.
The Preconditioning temperature can be
adjusted by selecting Preconditioning on this
screen, or in Settings.
Active Charging
During an active charging session, the
Charging screen displays and continuously
updates the following items:
.
The current charging status.
.
The range the vehicle is capable of driving
at the current charge level.
.
Range accumulation per hour of charging.
.
The estimated time at which the vehicle
will reach the desired charge level.
.
Target Charge Level Gauge: The current
charge level value represented as
a percentage and a coloured section of
the circular gauge.
To update the desired charge level for the
active charging session, drag the marker on
the Target Charge Level Gauge.
Selecting the Stop Charge button at any
time ends the active charging session. For
information on beginning a charging session,
see Plug-In Charging 0 212.
For AC Standard Power chargers, you can
also select the appropriate Charging Cable
Limit for your location. This determines how
much current can flow from an electrical
socket to the vehicle battery. It also ensures
proper charge time estimates.
When the charging cable limit is changed to
the highest setting on an AC Standard
Power circuit a notification is displayed.