Cadillac LYRIQ 2024 - Creating a Schedule

Cadillac LYRIQ Owner Manual (GMNA-Localizing-Europe-16878479) -
2024 - CRC - 9/20/23
Instruments and Controls 103
If no Home Charge Location is set, the AC
Standard Charging Cable limit will revert to
the lowest setting every time the vehicle is
shifted out of (P) Park.
Range and charge time estimates fluctuate
depending on a number of factors such as
charging cable level/limit, battery
temperature, and outside air temperature.
To learn more about the vehicle battery see
Plug-In Charging 0 212.
The peek-in charging screen can be used to
monitor your vehicle's charge status when
the vehicle is off, see Instrument Cluster
0 87. To monitor the charging status
remotely, download the myCadillac app on
your mobile device.
Fast Charging
If equipped, the vehicle will immediately
begin charging when plugged into a fast
charge station. While fast charging, the
vehicle will bypass any schedule or
departure time selection. See Plug-In
Charging 0 212.
Schedule
Select E to schedule a custom charging
plan for each day of the week. When the
vehicle is plugged in at the Home Charge
Location, the Schedule feature will
automatically charge to the desired charge
level and precondition the cabin by the time
set in the Schedule. This feature acts as a
more customisable Charge Later setting than
the one on the Next Charge screen.
Creating a Schedule
To create a schedule, touch Create Schedule.
If there is no Home Charge Location set, you
will be prompted to create one.
The Charging Schedule screen displays:
.
Days of the week.
.
A value selector for setting the desired
charge level.
.
A time selector for setting the time the
vehicle will reach the desired charge level.
.
Preconditioning: Allows the vehicle to
heat or cool the cabin to the desired
temperature by using energy from the
charger.
.
An z allowing you to close the Charging
Schedule screen.
.
Save & Close button: Applies any changes
made and exits the dialogue.
Days can be assigned to the schedule. Days
of the week are represented in toggles
containing their first letter. Touching each
day illuminates the graphic, confirming that
day is assigned that to the schedule.
Touching a second time unassigns days from
this schedule, dimming the toggle once
again. Select all days you wish to adhere to
the settings in this schedule. If there are
multiple charge schedules, days must be
unassigned from their current schedule
before they can be assigned to a new one.