Cadillac LYRIQ 2024 - Electric Drive Unit

Cadillac LYRIQ Owner Manual (GMNA-Localizing-Europe-16878479) -
2024 - CRC - 9/20/23
Driving and Operating 161
Retained Accessory Power (RAP)
When the vehicle is turned from on to off,
the following features (if equipped) will
continue to function for up to 10 minutes,
or until the driver door is opened.
.
Infotainment System
.
Power Windows (during RAP this
functionality will be lost when any door
is opened)
.
Sunroof (during RAP this functionality will
be lost when any door is opened)
.
Auxiliary Power Socket
.
Audio System
.
OnStar System
Shifting Into Park
To shift into P (Park):
1. Hold the brake pedal down and set the
parking brake. See Electric Parking Brake
0 167.
2. Press the P (Park) switch at the end of
the gear lever. See Electric Drive Unit
0 162.
3. The P indicator on the gear lever will
turn red when the vehicle is in P (Park).
4. Turn the vehicle off.
If the vehicle is shifted into P (Park) on a
hill, the Electric Parking Brake (EPB) may
apply automatically. The driver may not be
able to release the EPB using the EPB
switch. It should automatically release when
the vehicle is shifted out of P (Park).
Leaving the Vehicle with the Propulsion
System On
{
Warning
It is dangerous to get out of the vehicle
if the vehicle is not in P (Park) with the
parking brake set. The vehicle can roll.
Do not leave the vehicle when the
propulsion system is on. If you have left
the propulsion system on, the vehicle can
move suddenly. You or others could be
injured. To be sure the vehicle will not
move, even when you are on fairly level
ground, always apply the parking brake
and press the P (Park) button. See
Shifting Into Park 0 161.
If the vehicle must be left with the
propulsion system on, be sure that the
vehicle is in P (Park) with the parking brake
set, before leaving the vehicle. After pressing
the P (Park) button, hold down the regular
brake pedal. If you cannot see the P (Park)
indicator in the instrument cluster, it means
that the vehicle has not shifted to P (Park).
Shifting out of Park
This vehicle is equipped with an electric
drive unit. To shift out of P (Park) the
vehicle must be on, the brake pedal applied,
and the charging cable unplugged.
Parking the vehicle in extreme cold for
several days without the charging cable
connected may cause the vehicle not to
start. Plug the vehicle in to allow the high
voltage battery to be warmed sufficiently.
To shift out of P (Park):
1. Apply the brake pedal.
2. Press POWER
O to turn the vehicle on.
3. Verify that the vehicle is unplugged and
the vehicle ready light is on.
4. Move the shift lever to the desired
position.
After releasing the gear lever, it will return
to the centre position.
The P indicator will turn white and the gear
indicator on the gear lever will turn red
when the vehicle is no longer in P (Park).