0-9 (Numbers): Select this screen button to select
numbers.
U (Space): Select the space screen button to enter
a space between characters or the words of a name.
q (Backspace): Select the backspace screen button if
an incorrect character has been selected.
To make name selections easier, the system will only
highlight the characters that can follow the last one
entered. For example, if a Z is entered, a T may not be
available for selection.
If a name does not display after entry, it may need to be
entered differently, the map DVD disc may not contain
that information, or the correct search area has not been
selected. See Database Coverage Explanations on
page 2-42 for more information or Destination on
page 2-14 to change the search area.
Maps
This section includes basic information needed to know
about the map database.
The maps are stored on a DVD. The 48 contiguous
United States and portions of Canada are contained on
one disc.
Installing the DVD Map Disc
When a DVD Map Disc is installed, noise from the disc
may occur when entering the vehicle and turning the
vehicle off, this is normal system operation.
Your dealer/retailer may have installed the map DVD. If
the map DVD was not installed, do the following to
load it:
Read the following steps completely before operating
this feature.
1. Turn the ignition on.
2. Press the
O (power) knob to turn the navigation
system on.
3. Touch the OK screen button to agree to the
Caution screen.
2-4
To Next Page
Loading...
