Ejecting the DVD Map Disc
When the DVD map disc is not loaded, you will not be
able to use the navigation portion of the system.
1. Press the MENU key to enter the Menu options,
then press the MENU key repeatedly until Nav is
selected or touch the Nav screen button.
2. Touch the Map Database Information screen
button.
3. Touch the Change screen button. The screen will
tilt, exposing the map DVD slot and the map DVD
will eject. Pull the disc out.
4. Touch the Close screen button. The screen will
close.
Handling the DVD Map Disc
When handling the DVD map disc, be careful of the
following:
• Handle the disc very carefully to avoid
contamination or flaws. Signals may not read out
properly if the disc gets contaminated or flawed.
• If the disc gets soiled, use a soft cloth to gently wipe
it out from the center of the disc to the outside. Do
not use photographic record cleaner, solvents,
or other cleaners.
• Do not use the disc to rest on while writing or
drawing using any writing utensil or attach a seal to
any of the sides or the disc.
• Do not keep the disc in direct sunlight, high
temperatures, or humidity.
• After using the disc, place it back into the
original case.
Map Adjustments
The system allows you to adjust the scale of view on
the map. Also, as you drive, the map will scroll
automatically based on the direction of travel.
Map Scales
V
/ U (Zoom In/Zoom Out): Touch the zoom in or
out screen buttons or the scale on the bar to change the
level of map detail. The scale will appear on the
screen once the zoom in or zoom out screen buttons
are selected. The system will adjust the map
accordingly. The scale of a map can range from 150 ft.
(45 m) to 250 mi. (402 km). To change from English
or metric, see “Driver Information Center, DIC Controls
and Displays” in the Index of your vehicle’s owner
manual.
2-6
To Next Page
Loading...
