Category:
1. Touch the screen button, located in the middle of
the screen, to receive a list of all of the selected
band stations in the area.
2. Use the up and down arrow screen buttons to scroll
the frequencies.
3. Touch the desired frequency.
4. For XM, touch the left and right arrow screen
buttons to change categories. The station
information displays. See “Radio Menu” later in this
section to add and remove XM categories from
the category list. XM lists also contain a category to
select and the stations or channels that pertain to
the category. Select all of the categories when using
the right and left arrow screen buttons on the
main audio screen. The categories, once removed,
cannot be selected from the category list screen.
FM lists can also contain a category to select if
stations in your area support Radio Data
Systems (RDS).
$ Refresh List: Touch to refresh the list of stations.
When viewing a map screen, the name of the station or
channel displays.
¨ SEEK / © SEEK:
• To seek stations, press the left or right arrow keys
to go to the next or previous station.
• To scan stations, press and hold either arrow for
more than two seconds. The radio goes to a
station, plays for a few seconds, then gos to the
next station. To stop scanning, press either
arrow again.
FM source shown, other sources similar
3-4
To Next Page
Loading...
