CD Commands
The following are CD, MP3, and DVD commands that
can be accessed by clearly stating the commands
exactly as they are written.
CD, DVD, Disc: Use this command to select a CD,
DVD, or disc that is currently loaded.
CD, DVD, Disc, [select] track (one, two, three, etc.):
This command instructs the system to select a
specific track number.
CD, DVD, Disc select next folder: Use this command
to select the next folder on the MP3 or audio DVD.
CD, DVD, Disc select previous folder: Use this
command to select the previous folder on the MP3 or
audio DVD.
CD help, DVD help, Disc help: This command
instructs the system to assist with CD and DVD
commands.
Auxiliary Commands
The following auxiliary commands can be accessed by
clearly stating the commands exactly as they are
written. The commands are available when the auxiliary
source is available.
Aux, Auxiliary: Use this command to select the
auxiliary device, when a device is connected.
OnStar
®
Command
OnStar: This command instructs the system to connect
to OnStar
®
. You will enter the OnStar
®
voice recognition
system. Refer to your OnStar
®
manual for more
information.
Voice Help
Voice help: This command will provide a description of
help commands that are available to use.
4-5
To Next Page
Loading...
