9-36 Vehicle Care
Up–Level Headlamp Assembly
(Driver side shown, Passenger
side similar)
A. High/Low‐Beam Headlamp
B. Daytime Running Lamp (DRL)
C. Turn Signal Lamp
Up–Level Headlamp Assembly
(Driver side shown, Passenger
side similar)
A. High/Low‐Beam Headlamp
B. Daytime Running Lamp (DRL)
C. Turn Signal Lamp
Driver Side
The removal of the underhood
electrical center is required for the
replacement of one of these bulbs:
1. Open the hood. See Hood
on
page 9‑5
.
{
WARNING
Liquids from environment or
spillage and/or tools placed on
top of or used in the underhood
electrical center while the cover is
removed can pose a risk of
electrical shock/burn to anyone in
the vicinity. These conditions can
also cause damage to electrical
components on the vehicle. Keep
liquids and tools away from the
underhood electrical center when
the cover is removed.
To Next Page
Loading...
