Vehicle Care 9-43
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A)
counterclockwise to remove from
lamp assembly (C).
5. Pull the bulb (B) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install into lamp assembly.
7. Turn the lamp assembly into the
liftgate engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-Up Lamp
Hyperclick
16W
Daytime
Running Lamp
W21/5W
Headlamp
High-Beam
9005
Headlamp
Low-Beam
H11
License Plate Lamp W5W
Turn Signal Front WY21W
Tail/Turn
Signal Rear
W21W
For replacement bulbs not listed
here, contact your dealer/retailer.
To Next Page
Loading...
