Cadillac SRX 2010 - Configuring the Number of Favorite Pages; DSP (Digital Signal Processing) Settings; System Settings

Black plate (10,1)
Cadillac SRX Owner Manual - 2010
6-10 Infotainment System
DSP (Digital Signal Processing)
Settings
For vehicles with DSP, it is used to
provide a choice of different
listening experiences.
.
2.0 Normal ‐ Select this setting
to adjust the audio for normal
mode. This provides the best
sound quality for all seating
positions.
.
Centerpoint ‐ Centerpoint
®
signal processing circuitry. This
setting creates a surround sound
listening experience from stereo
CDs and satellite radio.
For more information on
Bose
®
Centerpoint
®
signal
processing circuitry, please visit
www. bose.com/centerpoint.
.
5.1 Surround ‐ The infotainment
system used in conjunction with
the Bose
®
5.1 Cabin Surround
®
sound system for the vehicle
includes digital 5.1 decoding.
This technology unlocks the full
benefit of digital 5.1 recordings,
so digitally encoded music and
movie soundtracks can be
presented faithfully and
accurately. If the video screens
or Rear Seat Audio (RSA) is on,
5.1 Surround is not available.
To adjust the DSP settings:
1. Press the TONE button.
2. Select DSP.
3. Select the setting.
Press the
0 BACK button to go
back to the Tone Settings menu.
System Settings
Configuring the Number of
Favorite Pages
To configure the number of available
favorite pages:
1. Press the CONFIG button.
2. Select Radio Settings.
3. Select Radio Favorites.
4. Select the number of available
favorite pages.
5. Press the
0 BACK button to go
back to the System
Configuration menu.