Cadillac SRX Owner Manual (Include Mex) - 2012
Storage 4-3
Additional Storage
Features
Cargo Cover
For vehicles with the dual position
cargo cover, it can be used to cover
items in the cargo area of the
vehicle.
The shade can be set in two
positions. It can be set in a halfway
open (A) position for loading objects
into the rear compartment, or the
lower (B) position to conceal objects
in the rear compartment.
Install the Cargo Cover
1. Hold the cartridge so that the
pull-out shade faces the rear of
the vehicle.
2. Align the cartridge over the pins
on the trim panels of the vehicle.
3. Push down on the cartridge to
snap it into place.
4. Unroll the shade toward the rear
of the vehicle.
5. Insert the shade pins in the
channels (C) on both sides.
6. Slide the shade to the lower (B)
position, or the halfway open (A)
position.
To Next Page
Loading...
