Cadillac SRX Owner Manual (Include Mex) - 2012
10-82 Vehicle Care
6. Remove the wing nut (D).
7. Remove the extension (A),
jack (B) and wheel wrench (C)
and place them near the tire
being changed.
Removing the Flat Tire and
Installing the Spare Tire
Take of f th e wh e e l cove r or ce n t er
cap, if the vehicle has one, to reach
the wheel bolts.
1. Do a safety check before
proceeding. See If a Tire Goes
Flat on page 10� 71 for more
information.
2. Turn the wheel wrench
counterclockwise to loosen and
remove the wheel nut caps.
Do not try to remove plastic caps
from the cover or center cap.
3. Pull the cover or center cap
away from the wheel. Store
the wheel cover in the cargo
area until you have the flat tire
repaired or replaced.
4. Turn the wheel wrench
counterclockwise to loosen
all the wheel nuts, but do not
remove them yet.
5. Place the jack near the flat tire.
Notice: Make sure that the jack
lift head is in the correct position
or you may damage your vehicle.
The repairs would not be covered
by your warranty.
To Next Page
Loading...
