Vehicle Care 10-57
2. Press on the bottom of the
handle assembly to unlatch it
and lift up on the handle.
The prop rod locks into place
when open.
3. Remove the spare tire cover.
4. Remove the rubber cover.
5. Remove the nut retaining the
spare tire.
6. Remove the spare tire and place
it next to the tire being changed.
7. Remove the wing nut.
8. Remove the extension, jack, and
wheel wrench and place them
near the tire being changed.
Removing the Flat Tire and
Installing the Spare Tire
Take off the wheel cover or center
cap, if the vehicle has one, to reach
the wheel bolts.
To Next Page
Loading...
