32 Infotainment System
.
iPod nano (4th generation)
.
iPod nano (3rd generation)
.
iPod nano (2nd generation)
.
iPod nano (1st generation)
.
iPhone 4
.
iPhone 3GS
.
iPhone 3G
.
iPhone
For proper operation, make sure the
iPod has the latest firmware from
Apple
®
. iPod firmware can be
updated using the latest iTunes
®
application. For more information,
visit www.apple.com/itunes.
Recording from the iPod to the HDD
is not supported. Media must be
recorded using a USB mass storage
device.
To connect and control an iPod,
connect one end of the standard
iPod USB cable to the iPod's dock
connector. Connect the other end to
the USB port in the center console.
iPod music information displays on
the radio’s display and begins
playing through the vehicle’s audio
system.
The iPod battery recharges
automatically while the vehicle is on.
When the vehicle is off while an
iPod is connected using the iPod
USB cable, the iPod battery stops
charging and the iPod automatically
turns off.
If the iPod is an unsupported model,
it can still be listened to in the
vehicle by connecting to the
auxiliary input jack using a standard
3.5 mm (1/8 in) stereo cable. See
Auxiliary Devices on page 38
iPod Music Menu
Press any of the following buttons
on the iPod Music Menu to display
the corresponding screen:
Shuffle:
1. Press to play the tracks
randomly rather than in
sequence.
2. Press the button again to stop
this function.
To Next Page
Loading...
Need help?
General
