ON-VEHICLE REPAIR INSTRUCTIONS > CAMSHAFT REPLACEMENT - LEFT SIDE >
TOOLS REQUIRED
EN 46108 Timing Chain Retention Tool. See Special Tools .
ON-VEHICLE REPAIR INSTRUCTIONS > CAMSHAFT REPLACEMENT - LEFT SIDE >
REMOVAL PROCEDURE
1. Remove the upper intake manifold with the lower intake manifold. Refer to Lower Intake Manifold
Replacement .
2. Remove the left bank camshaft cover. Refer to Camshaft Cover Replacement - Left Side .
3. Remove the camshaft sensors. Refer to Camshaft Position Sensor Replacement - Bank 2 (Left
Side) Exhaust and Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake .
4. Remove the camshaft position actuator solenoid. Refer to Camshaft Position Actuator Solenoid
Valve Solenoid Replacement - Bank 2 (Left Side) Intake .
ENGINE MECHANICAL - 3.6L (1 OF 5)
2006 Cadillac STS 3.6L Eng Base
To Next Page
