Auxiliary Video Image Screen
To play other audio sources using the auxiliary
device, do the following:
1. Connect the auxiliary device as explained
previously.
2. Play the auxiliary device according to the
auxiliary devices instructions.
3. Press the AUX hard key.
4. Select the Video In/Out screen button.
5. Press the BAND or the SRCE hard key to exit
or stop playing the connected auxiliary device.
See Navigation Audio System on page 92
for more information.
Radio Personalization
With this feature, you can recall the latest audio
system settings as adjusted the last time your
vehicle was operated. This feature allows
two different drivers to store and recall their own
audio system settings. The settings recalled by the
audio system are determined by which RKE
transmitter (1 or 2) was used to enter the vehicle.
The number on the back of the RKE transmitter
corresponds to driver 1 or to driver 2. The
audio system settings will automatically adjust to
where they were last set by the identified
driver. The settings can also be recalled using the
memory screens under the CONFIG MENU or
voice recognition. See Personalization on
page 138 for more information.
When battery power is removed and later applied,
you will not have to reset your audio system
preset stations.
119
To Next Page
Loading...
