To use the phone to connect or pair to the
navigation system:
1. Press the CONFIG hard key.
2. Select the
E (Bluetooth
®
) screen button.
3. Select the Receive screen button. Use your
phone’s search feature to select the vehicle
from the phone’s list of Bluetooth
®
devices
found.
4. Follow the instructions on the screen of the
phone to connect the phone with the vehicle.
They will differ depending on your phone.
Refer to your phone instructions for further
information.
5. Select default so the vehicle will attempt to
automatically connect to the phone when
you enter the vehicle.
The following options are available when in the
Bluetooth
®
set up screen.
My Info (Information): Select this screen button
to display the details of your Bluetooth
®
device
including the name and passkey information.
Selecting Device Name allows you to edit
the name of the Bluetooth
®
device name. Selecting
PASS-Key
®
allows you to edit the pairing
passkey used for your vehicle. The system default
device name is “Cadillac STS” and the
PASS-Key
®
is set to “1234”. It is recommended
that you change the default PASS-Key
®
to a
number that you can easily remember.
151
To Next Page
Loading...
