Bluetooth
®
Phone Screen
This information on this screen depends on the
information received from the phone. Some
phones may not support this feature. While in this
screen you can use the different features to
dial or to make a call.
Press the AUX hard key to get to the
BLUETOOTH PHONE screen. The screen will be
displayed even if the phone is not connected.
If the phone is not connected, the system
will display “Bluetooth phone not available, please
check phone.”
E (Bluetooth): Select this screen button to get to
the Bluetooth
®
screen.
^ (Call Status): This area will indicate the call
status. It will indicate whether or not there is good
signal strength and whether or not the phone is
in service range.
q (Backspace): Select this screen button to
delete numbers after they have been entered.
Select and release to delete numbers one-by-one
or hold it down to delete all numbers at the
same time.
Switch Call: Use this screen button to switch
calls during a call-waiting situation.
Hands Free: Select this screen button to put the
phone in hands-free mode and to hear it
through the vehicle’s speakers.
Private: Select this screen button to put the
phone in handset mode.
153
To Next Page
Loading...
