Installing the DVD Map Disc
When your vehicle is delivered from the factory,
the dealer may have installed the map DVD. If the
map DVD was not installed, use the following
directions to load the map DVD:
Read the following steps completely before
operating this feature.
1. Turn the ignition on.
2. Load the map DVD into the slot, located just
below the navigation system screen, by
inserting it partially until the system pulls it in.
Once the map DVD is inserted correctly, you will
have the following two choices:
I agree: Touch this screen button to proceed to
the navigation system.
^(Language): Touch this screen button to
change the language of the navigation system,
Driver Information Center (DIC), Head-Up Display
(HUD), etc. See “Language” under Personalization
on page 138 for more information.
Once a language has been selected, touch I
agree to enter the navigation system. The map will
appear showing your current vehicle position.
Ejecting the DVD Map Disc
When the DVD map disc is not loaded, you will
not be able to use the navigation portion of
the system.
Z (Map DVD Eject): Press the eject key,
located next to the map DVD loading slot, to eject
the map disc. Pull the disc out. The map DVD
slot is the slot directly below the display screen.
Setting the Search Area
See Destination on page 55 for information on
changing the search area.
Map Adjustments
You can adjust the scale of view on the map. As
you drive, the map will scroll automatically
based on the direction you are traveling.
19
To Next Page
Loading...
