To use the freeway entrance/exit destination entry
method, do the following:
1. Touch the Freeway screen button and enter
the freeway name. Be sure to use
abbreviations, such as I - 75, rather than
spelling out Interstate.
Touch Sym. to view a list of symbols to add
when entering a freeway name, touch
Others to view a list of special characters you
can choose from, or touch A - Z to return
to the alpha keypad.
A list of freeways will appear.
2. Choose a freeway from the list, and then
touch the Entrance or Exit screen button
to choose a point.
You can choose an exit/entrance point from
the list of names that will appear.
You can input the exit/entrance by name.
Touch the Input Name screen button. If you
choose to input the freeway exit or entrance
name, the alpha keypad will be displayed.
Touch the alpha keypad to enter the freeway
exit or entrance name.
You can sort the list by distance or name.
Touch the Name Sort screen button to sort the
list by name. Touch the Dist. Sort screen
button to have the list sorted by distance. The
distance sort list is based on the current
position of your vehicle.
After choosing a point from the list, a map
screen will then appear with the destination
marked.
3. Select the
h (destination) symbol screen
button to calculate the route.
4. Select the Guide screen button to start route
guidance.
See “Getting Started on Your Route” later in
this section for more information.
65
To Next Page
Loading...
