S T S
• Twilight Delay
• Driver Unlock at Off
• Doors Unlock at Off
• Driver Unlock in Park
• Doors Unlock in Park
• Keyless Front Door Unlock
• Keyless Doors Unlock
• Lock Delay
• Keyless Lock Delay
• Front Passenger Window Lock
• Chime Volume High
• Suspension Mode
Recalling Personalization Settings
Your preferences are recalled by
pressing any button on the Keyless
Access System transmitter (must be
activated through the DIC) or by
selecting the desired choice on the
Driver Selection submenu.
For vehicles with the navigation
audio system, see the Navigation
manual for additional operating
instructions.
MEMORY SETTINGS (if equipped)
This feature allows up to two drivers
to program and recall memory
settings for the driver’s seat position,
outside rearview mirrors position,
telescopic steering column position,
some radio and CD settings, last
climate control setting, HUD position
(if equipped) and other
personalization settings.
Storing Driver Settings
1. Turn the ignition to the On or
Accessory position.
2. Press the Driver 1 or Driver 2
button on the Keyless Access
System transmitter to identify
yourself.
3. Turn on the radio.
4. Press the CNFG (Configure) button
to enter the radio’s main menu.
5. Use the Tune/Select knob to scroll
to SETUP, and then press the knob
to enter the menu.
6. Use the Tune/Select knob to scroll
to DRIVER SELECTION, and then
press the knob to enter the menu.
7. Adjust the driver’s seat, outside
rearview mirrors and steering
column to a comfortable position.
8. Set the climate control temperature,
fan speed and mode settings, radio
presets, tone volume, playback
mode (AM/FM or CD) and CD
position.
9. Use the Tune/Select knob to scroll
to STORE DRIVER SETTINGS, and
then press the knob. Two beeps
will sound and your settings will
be saved.
Your memory settings are now
programmed. Any changes made
to the audio system and climate
controls while driving will be
automatically stored when the
ignition is turned off. If desired,
program the other driver number
by repeating the procedure.
Recalling Driver Settings
Your preferences are recalled by
pressing any button on the Keyless
Access System transmitter (must be
activated through the DIC) or by
selecting the desired choice on the
Driver Selection submenu.
For vehicles with the navigation
audio system, see the Navigation
manual for additional operating
instructions.
76880_08a_STS_GTK:STS 2007 A 5/11/07 4:15 PM Page 14
To Next Page
Loading...
