Cadillac XT4 2022 - Bluetooth System and Wireless Charging; Phone Pairing and Management; Wireless Charging Pad

11
BLUETOOTH
®
SYSTEM
WIRELESS PHONE CHARGING
♦
e Wireless Phone Charging system is located under the
center console armrest. To check phone compatibility, visit
my.cadillac.com/how-to-support. See your phone retailer for
required phone accessories or charging adapters.
1. e vehicle must be On or Retained Accessory Power must be
active.
2. Remove all objects from the charging pad.
3. Place the phone screen up on the symbol on the pad.
4. e
charging
symbol will display
on the infotainment
screen. If not charging,
remove the phone for
3 seconds, and rotate it
180 degrees.
See Instruments and Controls in your Owner's Manual.
Read your Owner's Manual for important information about using the
Bluetooth system while driving.
Before using a Bluetooth-enabled device in the vehicle, it must be
paired with the in-vehicle Bluetooth system. Not all devices will
support all functions. e vehicle must be stopped to pair a device.
For more information, visit my.cadillac.com/how-to-support.
PAIR A PHONE
1. To use voice recognition, press the Push to Talk buon;
aer the prompt, say "Pair Phone." To use the infotainment
screen, select the Phone icon > Connect Phone > Add Phone.
2. Start the pairing process on the phone. From your phone's
Bluetooth seings, select the name shown on the infotainment
screen.
3. Follow the pairing instructions.
4. When pairing is complete, the phone screen is displayed.
SECONDARY PHONE
A secondary phone can be paired to the Bluetooth system. e
system connects to the phone that is set to First to Connect. e
secondary phone can only receive calls.
To set the rst and secondary phones, select the Phone icon >
Phones >
Information by the phone name.
See Infotainment System in your Owner's Manual.
♦ Optional equipment