Cadillac XT4 2023 - Page 397

Cadillac XT4 Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
16412876) - 2023 - CRC - 3/25/22
396 Vehicle Care
Using the Tire Sealant and
Compressor Kit without
Sealant to Inflate a Tire
(Not Punctured)
The kit includes:
1. Sealant Canister Inlet
Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tire Sealant Canister
5. On/Off Button
6. Slot on Top of
Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10.
Air Only Hose
If a tire goes flat, avoid further
tire and wheel damage by
driving slowly to a level place.
Turn on the hazard warning
flashers. See Hazard Warning
Flashers 0 152.
See If a Tire Goes Flat 0 389
for other important safety
warnings.
1. Remove the compressor
from its storage location.
See Storing the Tire
Sealant and Compressor
Kit 0 398.
2. Remove the air only hose
(10) and the power plug (9)
from the bottom of the
compressor.
3. Place the compressor on
the ground near the
flat tire.
Make sure the tire valve
stem is positioned close to
the ground so the hose will
reach it.
4. Remove the valve stem
cap from the flat tire by
turning it
counterclockwise.
5. Attach the air only hose
(10) to the tire valve stem
by turning it clockwise until
tight.
6. Plug the power plug (9)
into the accessory power
outlet in the vehicle.
Unplug all items from other
accessory power outlets.
See Power Outlets 0 115.
If the vehicle has an
accessory power outlet, do
not use the cigarette
lighter.