Cadillac XT4 Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
16412876) - 2023 - CRC - 3/25/22
Vehicle Care 399
4. Turn the retainer nut
counterclockwise and
remove the spare tire.
Place the spare tire next
to the tire being changed.
5. The jack and tools are
stored below the
spare tire.
Remove them from their
container and place them
near the tire being
changed.
Removing the Flat Tire
and Installing the
Spare Tire
1. Do a safety check before
proceeding. See If a Tire
Goes Flat 0 389.
2. For vehicles equipped with
a wheel cover or center
cap, pull the cover or
center cap away from the
wheel to remove it.
Store the wheel cover in
the cargo area until the flat
tire is repaired or replaced.
If the vehicle has a center
cap with wheel nut caps,
the wheel nut caps are
designed to stay with the
center cap after they are
loosened.
Remove the entire center
cap if the wheel has a
smooth center cap. Place
the chisel end of the wheel
wrench in the slot on the
wheel, and gently pry it off.
3. Turn the wheel wrench
counterclockwise to loosen
all the wheel nuts, but do
not remove them yet.
Caution
Make sure that the jack lift
head is in the correct
position or you may damage
your vehicle. The repairs
would not be covered by
your warranty.
4. Position the jack lift head
at the jack location nearest
the flat tire.
To Next Page
Loading...
