Cadillac XT5 2018 - Memory Seats; Rear Seats

15
MEMORY SEATS
♦
REAR SEATS
SET MEMORY POSITIONS
With the ignition On or in Accessory mode:
1. Adjust the seat, power steering column and power outside
mirrors to the desired positions.
2. Press and release the
SET buon on the
driver’s door. A beep
will sound.
3. Immediately press and
hold buon 1 until two
beeps sound.
Repeat these steps using
buon 2 for a second
driver.
To store seat and power steering column positions for more
clearance when exiting the vehicle, repeat steps 1 and 2 using
the Exit buon.
RECALL POSITIONS
Press buon 1, 2 or Exit. Depending on vehicle state, the
buon may need to be held down until the seat, mirrors and power
steering column reach the set position.
e memory/exit positions can be programmed to be recalled
automatically.
To set the Auto Memory Recall or Easy Exit options, go to the
Seings > Vehicle > Comfort and Convenience menu.
See Seats and Restraints in your Owner's Manual.
REAR SEAT ADJUSTMENT
To slide the rear seat forward or rearward, li the bar (A) under
the seat cushion and slide the seat.
RECLINING THE SEATBACK
To recline the seatback,
pull the lever (B) on top
ofthe seatback and move
the seatback to the
desired position. Release
the lever.
FOLDING THE SEATBACK
1. Press the buon (C)
on the side of the head
restraint. It will fold rear-
ward automatically.
2. Pull the lever (B) on top
ofthe seatback and fold
the seatback forward or
pull the lever located on
either side of the rear
cargo area.
See Seats and Restraints in your Owner's Manual.
♦ Optional equipment
A
C
B