Cadillac XT6 2020 - REAR SEAT FEATURES; Folding Rear Seats; POWER LIFTGATE OPERATION; Opening, Closing, and Height Programming

15
FOLD THE 2ND-ROW SEATS
Pull the lever on the side of the seat cushion and fold the
seatback forward.
From the cargo area, press the le or right Seat Release
buon (B) on the passenger’s side of the vehicle to fold either
seatback.
To raise a seatback, li it up until it locks in place.
FOLD THE 3RD-ROW SEATS
1. Unbuckle the seat belts
and remove anything on
the seats or the oor in
front of the seats.
2. From the 2nd-row seats,
press and hold the bot-
tom of the le or right
Folding Seat switch (A)
near the door opening.
3. From the cargo area,
press and hold the boom
of the le or right
Folding Seat switch (C)
on the passenger’s side of
the vehicle.
4. To raise the seatbacks,
press and hold the top
of any Folding Seat
switch (A or C).
See Seats and Restraints in your Owner’s Manual.
OPEN/CLOSE THE POWER LIFTGATE
Press the Power Ligate
buon on the Remote Keyless
Entry (RKE) transmier twice.
Press the Power Ligate
knob on the driver’s door.
Press the touchpad above the
license plate to open the
ligate.
Press the buon next to the ligate latch to close the ligate.
PROGRAMMING THE LIFTGATE HEIGHT
1. Turn the Power Ligate knob to the 3/4 mode position.
2. Open the ligate. Adjust it manually to the desired height.
3. To save the seing, press and hold the buon next to the li-
gate latch for 3 seconds. e turn signals ash and beeps sound
when the seing is saved.
HANDS-FREE OPERATION
To open or close the li-
gate hands-free, kick your
foot straight under the
rear bumper, just le of
the license plate. e RKE
transmier must be with-
in 3 feet of the ligate.
e vehicle logo is pro-
jected on the ground near
the rear bumper, indicat-
ing the kicking motion location. e logo is shown for 1 minute,
depending on operating conditions.
See Keys, Doors and Windows in your Owner’s Manual.
♦ Optional equipment
REAR SEAT FEATURES POWER LIFTGATE
A
B
C