Cadillac XT6 2023 - Page 14

14
FRONT SEAT FEATURES REAR SEAT FEATURES
SET FRONT SEAT MEMORY POSITIONS
With the ignition On or in Accessory mode:
1. Adjust the driver’s
seat, power steering
column
♦
and power
outside mirrors to
the desired positions.
2. Press and release
the SET button on
the driver’s door. A
beep will sound.
3. Immediately press
and hold button 1
or 2 until two beeps sound. Use the button that matches
the Driver Information Center welcome message indicating
driver 1 or 2.
To store seat and power steering column
♦
positions for
more clearance when exiting the vehicle, repeat the steps
using the Exit button instead of button 1 or 2.
RECALL FRONT SEAT MEMORY POSITIONS
Press and hold button 1, 2 or Exit until the set position
is reached.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned on/off. For exit recall,
thedriver’s door must be opened.
To set the automatic recall options, go to Settings > Vehicle
> Seating Position > Seat Entry Memory and Seat Exit
Memory.
See Seats and Restraints in your Owner’s Manual.
ENTER OR EXIT THE 3RD-ROW SEATS
1. Remove anything
on the 2nd-row
seat or the floor in
front of the seat.
2. Pull the lever on top
of the seatback (A)
and pull the seat
forward. The driver-
side seat will tip
and slide forward.
The passenger-side
seat will tip, pitch
and slide forward for additional space. The passenger-side
seat also can be moved with a forward-facing child restraint
installed.
3. After entering or exiting, push or pull the seatback rearward
until the seat locks in place.
SLIDE THE 2ND-ROW SEAT
Lift the bar under the seat cushion to slide the seat forward
or rearward.
RECLINE THE 2ND-ROW SEAT
Pull the lever on the side of the seat cushion and move the
seatback to the desired position. Release the lever.
See Seats and Restraints in your Owner’s Manual.
A