Need help?Do you have a question about the CADWELL Sierra Summit and is the answer not in the manual?
General| Input Impedance | 100 MΩ |
|---|---|
| Connectivity | USB |
| Display | External monitor |
| Stimulator | Electrical and auditory/visual |
| Stimulus Types | Electrical, Auditory, Visual |
| Modularity | Modular design allows configuration for specific tests |
| Type | EMG/NCS/EP System |
Explains the purpose and scope of this user manual.
Provides a general description of the Cadwell Sierra Summit system and its configurations.
Details the device's intended medical use, patient population, and user requirements.
Guides users through the process of unpacking and verifying system components.
Lists the essential items included with the Sierra Summit system.
Illustrates and explains the various ports and connections on the Sierra Summit base unit.
Procedure to verify correct system setup for NCV data acquisition.
Details on accessing the system and initiating a new patient study.
Guides on selecting NCV protocols and performing stimulation.
Instructions for saving acquired data and creating reports.
Covers hardware connections and software verification for ultrasound.
Details on initiating scans, freezing images, and reviewing captured data.
Explains EMG+ acquisition modes and adjusting gain/sweep settings.
Guides on modifying muscle scoring and acquiring EMG+ data.
Procedure for acquiring and analyzing single fiber potentials.
Covers stopping acquisition, reviewing data, and manually rejecting traces.
Details amplifier settings, stimulator polarity, and stimulation procedures.
Guides on entering distance for velocity calculation and reviewing results.
Explains RNS stimulus train table configuration and delivery methods.
Instructions for placing and adjusting cursors for RNS measurements.
Covers blink reflex settings, electrode placement, and stimulation.
Guides on automatically placing cursors for blink reflex analysis.
Details SEP settings, checking impedances, and stimulus application.
Instructions for acquiring SEP responses and placing auto cursors.
Covers AEP settings, impedance checks, and behavioral threshold determination.
Guides on starting data acquisition, storing trials, and changing stimulation side.
Details VEP stimulus types, checkerboard settings, and impedance checks.
Instructions for acquiring VEP data and placing auto cursors.
Provides warnings regarding electromagnetic energy and electrical safety.
Details environmental hazards, use precautions, and electrical stimulation safety.
Guides on visual inspection, preventive maintenance, and calibration.
References operating environment limits and electromagnetic compatibility information.
Provides procedures for cleaning the base unit, amplifier, stimulator, and accessories.
Provides contact details for domestic, international support, and remote assistance.
To Next Page