The Amp Hound 2™ is the next level of simplicity and speed in hand-held
Automotive Current (Amperage) measuring tools. This is a revolutionary method
of Current measurement that now makes it possible to determine the amount of
Current in a fused circuit, in real time, without removing the Fuse!!
With the Amp Hound 2’s™ proprietary Audible Current Locator (ACL)* function, it
is now possible to read uctuating current in real time, troubleshoot Parasitic Drain
problems without removing power from the circuit! Reading Current (Amperage)
amounts, nding rogue power drains and identifying active/inactive circuits in hard
to access or unlabeled fuse boxes is now a snap!
The user simply places a standard set of test leads across the top of the Fuse or
attaches an included fuse adapter to the fuse. The Amp Hound 2’s™ ACL feature
then analyzes the circuit and provides the appropriate Tone based on the type of
circuit it found. In the case of a live circuit (3 quick beeps), the Amperage informa-
tion is instantly revealed in the numeric display. If there is no current the user will
hear (1 quick beep).
*Patent Pending
Amp Hound 2™ • Introduction
Page 3
To Next Page
Loading...