EasyManua.ls Logo

CALEFFI LEGIOMIX 2.0 - User Manual

CALEFFI LEGIOMIX 2.0
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Software di gestione per miscelatore LEGIOMIX 2.0
Management software for LEGIOMIX 2.0 mixer
Steuersoftware für Mischer LEGIOMIX 2.0
Logiciel de gestion pour mitigeur LEGIOMIX 2.0
Software voor beheer van het LEGIOMIX 2.0 -mengventiel
I
Code 600002
H0003548
www.caleffi.com
© Copyright 2018 Calef fi
EN
DE
FR
NL
MANUALE DI ISTRUZIONE SOFTWARE
INDICE/CONTENTS/
INHALTSVERZEICHNIS/
SOMMAIRE/ INHOUD
Installazione software Caleffi
Installation of Caleffi software
Installation der Caleffi-Software
Installation du logiciel Caleffi
Installatie software van Caleffi
5
Avvertenze
Warnings
Hinweise
Avertissements
Waarschuwingen
4
Installazione cavo USB - RS-485
Installation of USB - RS-485 cable
Installation mit USB - RS-485-Kabel
Installation du câble USB - RS-485
Installatie USB - RS-485-kabel
2
SOFTWARE INSTRUCTION MANUAL
SOFTWARE-BEDIENUNGSANLEITUNG
MANUEL D’UTILISATION DU LOGICIEL
GEBRUIKERSHANDLEIDING VAN DE SOFTWARE

Other manuals for CALEFFI LEGIOMIX 2.0

Preview: Installation And Commissioning Manual
Installation And Commissioning Manual12 pages

Questions and Answers

  • L
    lclarkAug 11, 2025
    What to do if there is no valve outlet flow in my CALEFFI LEGIOMIX 2.0?
    • A
      Alexander RochaAug 11, 2025
      If your CALEFFI Control Unit has no valve outlet flow, the possible causes are: obstructed in-line strainers, insufficient supply pressure, or dirt obstructing water flow through the valve. To resolve this, you should clean the strainers, restore supply conditions, and remove any dirt or scale from the valve.
  • M
    michellefordAug 19, 2025
    Why does my CALEFFI LEGIOMIX 2.0 Control Unit have mixed water temperature fluctuations?
    • B
      biancawilliamsSep 12, 2025
      Mixed water temperature fluctuations in your CALEFFI Control Unit can be caused by incorrect inlet water temperatures, inlet water supply failure, or bad commissioning. Restore inlet conditions to within the valve specification range to resolve this issue.
  • J
    Jacob HoltAug 27, 2025
    What to do if my CALEFFI Control Unit has an incorrect valve outlet flow rate?
    • A
      Allen GuzmanAug 27, 2025
      If your CALEFFI Control Unit has an incorrect valve outlet flow rate, the causes might be insufficient water supply, inlet water temperature/pressure fluctuations, or adverse conditions due to other water draw-off points in the system. Stabilize the supply conditions at the inlet to correct this.
  • H
    Holly FranklinSep 4, 2025
    How to fix hot water supplied to cold water taps in CALEFFI LEGIOMIX 2.0?
    • B
      barbara76Sep 4, 2025
      If hot water is being supplied to cold water taps with your CALEFFI Control Unit, it could be due to inlet check valves not operating correctly or seals being worn/damaged, or check valves not being fitted at all. You should replace damaged check valves or install check valves if they are missing.

CALEFFI LEGIOMIX 2.0 Specifications

General IconGeneral
Power Supply24 V AC/DC
Supply Voltage24 V AC/DC
Communication ProtocolModbus RTU
Maximum Operating Pressure10 bar
ModelLEGIOMIX 2.0
Max. Ambient Temperature50 °C (122 °F)
MaterialPlastic
Connection Size1/2"
CertificationsCE
TypeElectronic mixing valve control unit

Related product manuals